Posted by Happy Wong from Daban 07-03-2015

1.Check the spare and accessary parts if all in readiness before installation.

2.Install triangular valve to keep balance between the cold and hot water inlet.

3.Measure distance and install downcomer.Glue painted should be uniformity to  ensure close connected pipes.

4.Install the cabinet corner and check if all in the same level.If not, appropriate adjustment should be needed.

5.Place the bathroom vanity cabinets against the wall.Then ,check the position of the warter inlet and outlet.If not proper position,modification should be action.

6.Install faucet above the basin.It's beter to purchase a whole set mating parts of faucet and bathroom cabinet.Then,the angle of water inlet of the bathroom vanity cabinets whole set will be good.

7.Fix the the basin and faucet by nuts.One hand hold the faucet well when fixing to avoid position deviation.

8.Adjust the optimum position of the faucet and basin placed on the bathroom vanity cabinets.

9.Check the length and position of the water inlet and outlet and downcomer connected to the basin if proper.

10.Install and adjust the handle of the cabinets.

11.Fix the space between the baisn and tile by silica gel to avoid water leaky and keep stable bathroom vanity cabinet.

12.Open the faucet to test water outlet.If unsmooth water supply,adjust the angle of the faucet.

13.Clean the bathroom vanity cabinet after installation.