How to install kitchen cabinet

The general principle is wall hanging cabinets’ installation after base cabinet, and the hardware is the key-point.

Step 1, installation of base cabinet , you should clean the kitchen floor before installation, in order to accurately measure the ground level. If the kitchen cabinet cannot be the same level with the ground, cupboard doors may leave a lot of gaps which leads to unbalance of its doors, by means of using the level ruler to measure and understand the ground level ,finally adjust horizontal of the kitchen cabinet, if base cabinet is L or U shape, then you need to find out the base point on both sides of the ground from the right Angle to the side extension; the middle straight base kitchen cabinet of U-shaped kitchen should be first put horizontally,  and then install other two cabinets from its both angles , in case of the occurrence crack of the base cabinet after installing finished,  adjusting and correct the leveling by change the position of legs .

Step 2,after the installation of base kitchen cabinet, you can start to install the wall hanging cabinet , to ensure that the level of the expansion bolts are in a line, you need to draw a horizontal line on wall, normally the distance between horizontal line and the countertop is 650 mm, you can also decide this distance as your demand, to ensure that connect closely of your hanging cabinet and wall you should use the same connector, it is necessary to adjust the height of your hanging cabinet in a suitable  site ,because it will directly affect the aesthetic of your whole kitchen.

Step 3, installation of countertop, At present the consumers of kitchen cabinets on the market are often requiring to use man-made stone or natural stone as countertops. Stone material countertop consists of a few stone adhesive, the appearance and the quality of this stone countertop are greatly influenced by its bonding time and glue quantity and level. Usually, its bonding needs half an hour in summer, but 11.5 hours for winter.  To use professional glue adhesive for bonding, and using grinding machine for grinding and polishing In addition, some ambry manufacturer to error due to decorate, the ground ark and condole ark installation after the completion of a period of time to install countertops, there will be a quantity of mesa process in the middle.

Step 4, installation of hardware,  birdbath ,faucet and pull basket is the key device of a kitchen, in order to prevent the dust felling into the slide channel of pull basket, you should first put a cover on the pull basket, birdbath device is engaged in the problem of draining , so you should use the professional drilling device to punch according to the size of the draining pipe, the diameter of the holes should be larger than the pipe at least 3 to 4 mm, and hermetic seal is used immediately after drilling hole to avoid edge expansion deformation which can affect the service life of the cabinet, In order to prevent water or water seeping in, hose connection with birdbath should use sealing strip or glass glue sealing, hose and sewage also want to use glass glue to seal

Step 5, installation of kitchen electric appliance, it is most important to set plug holes for the embedded electronics devices, but the holes of power can't open too small, so as to avoid difficulty of its uninstalling when comes to maintenance, to guarantee the exhausting of smoke, you must set a lampblack machine above the stove in a hearth distance between 750 and 800 mm, device around the kitchen and smoke lampblack machine to align with each other, and height can be adjusted according to actual condition device kitchen is the most important connection gas source, to ensure that songs in the mouth does not leak, air supply should be sent by the gas company commonly connection, if it is a decoration workers device, also need to let the gas company to detect gas leakage

Step 6, installation of its doors, adjustment of the door is in order to ensure the cupboard door united and ensure horizontal flat as well as vertical degree, the distance between base kitchen doors’ surface and the wall is about 550 mm, and 300 millimeter for hanging cabinet, at last, you should also do some kitchen clean after the installation of whole set of kitchen cabinet.